Table of Contents
Configuring the device
An Active Track device can be configured in two ways: by using a set of AGP3 cables or by sending text message to the device's card number.
You can watch the video presenting how to configure the Active Track device:
Upload device setting by mobile phone
To the basic configuration of your device you can use mobile phone. The necessary condition is the inserted SIM card into device must not have a PIN code. Then send an SMS message in the following format to the device:
1111 SERVER=at.active-view.eu PORT=7417 APN=internet DNS1=8.8.8.8 DNS2=4.4.4.4 KILL
NOTE: APN depends on GSM provider. SIM card must have credit to connect server by GPRS.
Upload setting by GPRS transmitter configurator
- In order to configure a transmitter using the GPRS Transmitter Configurator, please download the program from the website, after registering: http://www.ebssmart.com.
- Link device to PC like below. Panic button should flashing. Use AGP3 set plus RS232/USB adapter.
- Find the Serial Port number.
- Set up the Serial Port in GPRS transmitter configurator.
- File out the Server address, Port, DNS 1, DNS 2 and APN then press red arrow.
- Unplug adapter with cable. Insert SIM card. Remember to change PIN Code or remove it.
We configure Active Guard device in the same way, only we set different server port - 7419.