====== Configuring the device ======

An Active Track device can be configured in two ways: by using a set of AGP3 cables or by sending text message to the device's card number.

You can watch the video presenting how to configure the Active Track device:

[[https://www.youtube.com/watch?v=iNld68XXdZU| How to configure the Active Track device]] 



===== Upload device setting by mobile phone =====

To the basic configuration of your device you can use mobile phone. The necessary condition is the inserted SIM card into device must not have a PIN code. Then send an SMS message in the following format to the device:

**1111 SERVER=at.active-view.eu PORT=7417 APN=internet DNS1=8.8.8.8 DNS2=4.4.4.4 KILL**

**NOTE:** APN depends on GSM provider. SIM card must have credit to connect server by GPRS.

===== Upload setting by GPRS transmitter configurator =====
  * In order to configure a transmitter using the GPRS Transmitter Configurator, please download the program from the website, after registering: http://www.ebssmart.com.
  * Link device to PC like below. Panic button should flashing. Use AGP3 set plus RS232/USB adapter.
{{ :av_manual:link_device.jpg |}}
  * Find the Serial Port number.
{{ :av_manual:device_manager.png |}}
  * Set up the Serial Port in GPRS transmitter configurator.
{{ :av_manual:conection_definition.png |}}
  * File out the Server address, Port, DNS 1, DNS 2 and APN then press red arrow.
{{ :av_manual:konfigurator_dostep_en.png |}}
  * Unplug adapter with cable. Insert SIM card. Remember to change PIN Code or remove it.

We configure Active Guard device in the same way, only we set different server port - //7419//.