User Tools

Site Tools


av_manual:device_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

av_manual:device_configuration [2016/11/29 10:50]
av_manual:device_configuration [2022/04/01 10:42] (current)
Line 1: Line 1:
 +====== Configuring the device ======
 +
 +An Active Track device can be configured in two ways: by using a set of AGP3 cables or by sending text message to the device's card number.
 +
 +You can watch the video presenting how to configure the Active Track device:
 +
 +[[https://www.youtube.com/watch?v=iNld68XXdZU| How to configure the Active Track device]] 
 +
 +
 +
 +===== Upload device setting by mobile phone =====
 +
 +To the basic configuration of your device you can use mobile phone. The necessary condition is the inserted SIM card into device must not have a PIN code. Then send an SMS message in the following format to the device:
 +
 +**1111 SERVER=at.active-view.eu PORT=7417 APN=internet DNS1=8.8.8.8 DNS2=4.4.4.4 KILL**
 +
 +**NOTE:** APN depends on GSM provider. SIM card must have credit to connect server by GPRS.
 +
 +===== Upload setting by GPRS transmitter configurator =====
 +  * In order to configure a transmitter using the GPRS Transmitter Configurator, please download the program from the website, after registering: http://www.ebssmart.com.
 +  * Link device to PC like below. Panic button should flashing. Use AGP3 set plus RS232/USB adapter.
 +{{ :av_manual:link_device.jpg |}}
 +  * Find the Serial Port number.
 +{{ :av_manual:device_manager.png |}}
 +  * Set up the Serial Port in GPRS transmitter configurator.
 +{{ :av_manual:conection_definition.png |}}
 +  * File out the Server address, Port, DNS 1, DNS 2 and APN then press red arrow.
 +{{ :av_manual:konfigurator_dostep_en.png |}}
 +  * Unplug adapter with cable. Insert SIM card. Remember to change PIN Code or remove it.
 +
 +We configure Active Guard device in the same way, only we set different server port - //7419//.
 +
 +
 +